Homemade Jungle Terrain Completed

 I've deleted the previous post; it doesn't make much sense to have the process of making these jungle terrain pieces spread across two posts when I can just have one that covers the whole thing. Truth be told, I was expecting these to take much longer than they ended up being!

Just trimming the pegs on the tree trunks and hitting everything with some matte varnish left.

These are based on irregular Terrain Bases from Things From The Basement; I bought one of each set, and had one base left over from a previous set I'd bought; now I have one left over in a different shape! These were primed black, then the tree trunks glued into place. Once that was done, I painted over the MDF and the base of the plastic trees with a medium brown craft paint. 

Once that had tried, I painted some thinned down PVA glue over the painted areas, and gave everything a good coating of Woodland Scenics blended "Earth" ground cover. Once that had dried, I thinned down some more PVA glue even further, splodged it on in irregular patterns, and added my own mix of coarse "Light Green" turf and fine "Green Grass" turf. 

Once that was all well and dry, I hit everything with a very heavy coat of varnish to seal the flock down. 

The next step then was to get to work on the foliage! I'd bought two assortments of plastic "diorama" plants aimed at children's school projects off Amazon, yielding a total of 200 pieces. Some of them weren't really usable, but I had probably 150-odd pieces that were. I also bought a roughly-foot square rubber mat at my local craft shop, studded with little ferny bits. That right there was probably the biggest expenditure of the whole project, but I only ended up using about a third of it. 

I started by trimming the stems down on the Amazon plastic plants, mixing them all together in a bin.

After that, it was just a matter of warming up the ol' hot glue gun and grabbing bits of foliage at random out of the bin and gluing them down in a pleasing pattern around each tree trunk. As needed to fill space, I popped a ferny bit off the rubber mat, trimmed the socket down, and glued it down between other plants. The process went very quickly, aided by the relaxing tones of Ken over at the Yarkshire Reet Big Wargame Podcast; trimming the plants and gluing them down took roughly the duration of the latest episode. 

I had to move to a secondary desk in my basement; my main work bench doesn't have anywhere to plug a hot glue gun into!

Once the glue was all fully dried, I popped the canopies back on to the palm trees and sat back to admire my work, as seen at the top of the post. I'll still need to trim the pegs that the canopies fit on to, and hit everything with a coat of matte varnish once we get a dry day (maybe the end of this week). 

I'm out of palm trees, but I still have probably 30-40 bits of foliage left as well as 2-3rds of the ferny mat; it might not be immediately but I probably will do another bunch of these since they went together so easily and turned out so well. Maybe do a few with some elevation added with tiers of cork? 

I'd guess I spent about $62 on supplies for this project; given the amount I have left over for future projects, we can probably treat this as $45 worth of supplies, or about $4.50 per piece of terrain. Given the last time I bought pre-made jungle terrain, I got three bases for about $40, or about $13 apiece. Making my own has resulted in big savings! 

Figures Acquired in 2025: 199

Figures Painted in 2025: 162